Scale anticaduta - FABA A12

FABA™ A12 ladder with fall arrest rail. Available in various lengths from 560 to 5,600 mm. Recommended length up to 2,800mm for transport optimisation and ease of installation. Distance between rungs 280 mm. Catching... 

FABA A12 fall arrest rail. Available in various lengths from 560 to 5,600 mm. Recommended length up to 2,800mm for transport optimisation. Catching cut-outs in fall arrest rail every 40 mm. Material: Hot-dip galvanised... 

FABA A12 ladder with fall arrest rail. Available in various lengths from 560 to 5,600 mm. Recommended length up to 2,800mm for transport optimisation. Distance between rungs 280 mm. Catching cut-outs in fall arrest rail... 

FABA™ EZ, detto semplicemente" "facile" Il più grande vantaggio e differenziatore di questo carrello è la sua possibilità di essere inserito e estratto in qualsiasi punto di un binario o di una scala, Grazie al suo design... 

Presentiamo il nuovo cursore FABA™ Grip 150kg. Si tratta di un aggiornamento all'attuale FABA™ Grip. Questa nuova versione è conforme all'ultimo standard applicabile EN 353-1:2018 e al regolamento europeo 2016/425 ed è certificata... 

Presentiamo il nuovo cursore FABA™ AL-D 150kg. Si tratta di un aggiornamento all'attuale FABA™ AL-D. Questa nuova versione è conforme all'ultimo standard applicabile EN 353-1:2018 e al regolamento europeo 2016/425 ed è certificata... 

Il sistema FABA ™ A12 è stato introdotto nel 1995. Il design della rotaia di sicurezza e dei carrelli è asimmetrico e garantisce che i carrelli vengano sempre utilizzati nella giusta direzione. Dimensioni profilo della... 

The FABA™ ladder with release facility enables the comfortable insertion and retrieval of the FABA™ slider at the lower end of the ladder. The FABA™ ladder with release facility may only be installed as the lowermost segment... 

Joint connector between FABA™ A12 ladders or rails. Materials: Galvanised steel or stainless steel. Includes set of 2 FABA™ A12 screws.  

FABA T-bolt kit made specifically for fixing the FABA™ A12 rail to the different brackets. Each kit includes 1 screw with nut and washer. Lengths of M12 x 35 mm, x 50 mm and x 65 mm. Materials: Stainless steel.  

The curved entry / exit is located at the top of the ladder or fall arrest ladder or rail. It facilitates the passage from the ladder to the deck or access. Recedes 892 mm into a safe access zone. Available for FABA... 

The entry and exit section allows the comfortable insertion and extraction of the FABA™ carriage and must be installed at every position of the climbing facility that is intended to ensure safe release from the climbing protection... 

The square tube bracket is designed for installation of the FABA™ ladder to a masonry structure. Available with holes for wall fixing: Ø = 10.5 mm and Ø = 14 mm. Supplied with 1x screw kit M12 x 35mm. Fixing anchors... 

Bracket for the installation of FABA™ rail on the side profile (which must be rectangular) of an existing ladder. Brackets for anchoring FABA™ A12 fall arrest rails. Dimensions: 6 different models are available. Materials:... 

The resting platforms are placed every 12 m or dependent on the building and local standard or law The device can be folded down to ease passage and has two platforms, each 130 x 300 mm For FABA A12 ladder systems. Distance...